Technical data:

Flow rate：30~660 L/min

Pressure:320 bar

Connection: Flange(Dia.20mm~50mm)

 

Introduction:

The filter is composed of two single bowl filters, check valve, directional valve and indicator. It should be installed at outlet of the high-pressure line. The feature of this filter is it allows continuous operation even during replacing element, which is clogged by contaminant. When the pressure of the contaminant clogged element reaches to 0.5MPa, the indicator gives signals showing that the element should be changed. At this time, turn the directional valve, let the other filter work and change the clogged element. If the element can’t be changed in time until the pressure reaches to 0.6MPa, the by-ass valve will open automatically to keep the system safety.

Our advantage:

1. Professional hydraulic filter manufacturer.

Our enterprise has over 20 years of experience designing and manufacturing hydraulic filters with ASME U stamp, NB, ISO9001, ISO14001 certificates.

2. Our hydraulic filters 100%tested.

According to ISO 2941, ISO 2942, ISO 2943, ISO 3724, ISO 3968, ISO11170, ISO16889.  Filters plus the following tests, take pressure filter which working pressure 42MPa as an example: Burst pressure 126MPa for 1minute, Fatigue pressure 42MPa @1million cycles, High pressure sealing test 63MPa for 2minutes, Low pressure sealing test 600KPa for 3minutes

3. Competitive price, short deliver time with stable supply.

Because of experience of long-term production and many years of export；Keep stock of parts.

Our test:

Our workshop: